Skip to content
English
  • There are no suggestions because the search field is empty.

Basis Metering: Existing Home - Meter Replacement (Genesis)

How to get a Basis meter installed for a Genesis customer. Genesis uses its own meter change form, and you must tell them it is a Basis meter.

Version 1.0 · Last updated 17 November 2026

 

Use this article when

Your customer is with Genesis, the home has an existing non-Basis meter, and you are installing a Basis Board with a Basis meter.

This follows the same process as Existing home: replace the meter. The key point is how you request the job. Genesis processes it as a meter relocation, through its own online form.

If you are looking for an overview, read Basis Metering: Start Here.

 

What is different with Genesis

  • You must request the job with the Genesis meter change form.
  • You select Electricity meter relocation / shift on the form.
  • You must state that a Basis meter is required, in the Additional information field. This is the most important step.
  • You must name your livening agent (inspector) on the form. Genesis cannot raise the request without one.

If you do not fill the form out yourself, and it does not say Basis meter, Genesis could process a standard relocation, without a Basis Meter specified and it is much harder to change after Genesis raises the job. Please do not request a replacement via Genesis customer service for this reason.

 


Before you start

  1. Confirm your customer is with Genesis.
  2. Ask your customer about controlled load and inclusive load (they will have to change tariff, see the Tariffs section below).
  3. Send the ICP (Installation Control Point) number to Basis at metering@wearebasis.com. Do this before you submit the Genesis form.
  4. Book a Basis-approved livening agent (inspector) - see below. You need their name for the form.
  5. Confirm you have consent from the property owner for the metering work.

Tariffs

The Basis Meter supports Time of Use (TOU), Anytime (uncontrolled) and solar export tariffs. If your customer is on a controlled or inclusive load tariff they will need to change.

Do not guess the tariff setup. Many customers do not know how their home is metered. Send us the ICP number and we will confirm.

 

Lines networks


If you work on an unconfirmed or unsupported network, call us before you quote the job. We may be able to provide a solution.

 


Who does what

  • You or your customer request the meter relocation directly with Genesis, using the Genesis form (charges usually apply).
  • You remove the existing meter and install the Basis Board.
  • You book a Basis-approved livening agent (inspector).
  • The livening agent inspects the high-risk works, installs the Basis meter into the Basis Board, configures and certifies it, and livens the installation.

 

Before install day

  1. You send the ICP number to Basis.
  2. You book a Basis-approved livening agent (inspector).
  3. You submit the Genesis meter change form (steps below).
  4. Confirm the livening agent is specified to Basis and to Genesis.

How to fill in the Genesis form

Open the form: Genesis meter change request. You can also find it on the Genesis Metering requests page, under Request a meter change > Fill in our form.

The form has four steps.

Step 1 of 4: What would you like to do?

  • Select Electricity meter relocation / shift.
  • Select Next.

 

Step 2 of 4: Property details

  • ICP: Enter the 15-character ICP number. Remove any special characters.
  • Who is filling in this form? Select Electrician, Genesis customer or Project manager/site contact.
  • Reason for relocation: Select Meterboard upgrade.
  • Preferred date: Enter the date you want the meter work done.
  • Hazards: Tick any that apply (asbestos meter board, animals, other) or No hazards.

 

Step 3 of 4: Customer and electrician details

  • Property owner consent: Select Yes. If you do not have consent, get it before you continue.
  • Customer's details: Name, phone and email.
  • Electrician's details: Name, phone and email.
  • Preferred inspector: Enter the name of your Basis-approved livening agent. Genesis cannot raise the request without one.

 

Step 4 of 4: Final details

  • Fee: Genesis charges a fee of $230.00 incl. GST for a meter relocation (current as of 17 Nov 2026). Tick I accept. Genesis may contact your customer to confirm they accept the fee (please inform your customer ahead of time).
  • Your full name: Enter your name.
  • Additional information: State that a Basis meter is required. Use this text:

Basis meter required. Please install a Basis meter into the Basis Board (Basis smart switchboard). Basis has the ICP number for this job.

  • Select Submit.

Do not leave Additional information empty. This field is the only place on the form that tells Genesis the job is for a Basis meter.

 

On the day

  1. Remove the existing meter.
  2. Install the Basis Board.
  3. The livening agent installs the Basis meter into the Basis Board.
  4. The livening agent certifies the meter and livens the property.

 

After the installation

The house is livened and ready to go. Your customer can stay with Genesis, or move to any retailer that supports Basis metering.

 

What your customer will see

Genesis can ask your customer for a recent power bill. Genesis may also ask for a manual read of the old meter. This happens while they process the request.

Genesis may contact your customer to confirm the $230.00 incl. GST relocation fee (current as of 17 Nov 2026). Additional network or contractor fees can also apply. Tell your customer before you submit the form.

 


If your job is different

Call 0800 995 085 or email metering@wearebasis.com.